Your Quote Request  |  Checkout   

CONSTRUCTION EQUIPMENT::
Excavator, JD 110

Where to find Excavator, JD 110 in Flemington

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: John Deere
Model: 110
Comments:
  • 110 - WEIGHT 22,000 LBS
  • SPECIFICATIONS
  • ENGINE
  • Type .............John Deere 4045T with altitude-compensating turbocharger
  • Rated power .......................................80 SAE net hp (60 kW) @ 2,200 rpm
  • Cylinders...........................................................4
  • Displacement....................................................276 cu. in. (4.5 L)
  • Maximum net torque .................................244 lb.-ft. (330 Nm) @ 1,300 rpm
  • Fuel consumption, typical....................2.0 to 3.0 gal./hr. (7.6 to 11.4 L/h)
  • Cooling fan..........................................................suction-type
  • Electrical system ....................................24 volt with 45-amp alternator
  • Batteries (two 12 volt) ................................reserve capacity: 180 min.
  • Off-level capacity..........................................100% (45 deg.)
  • HYDRAULIC SYSTEM
  • Main pumps................................two variable-displacement axial-piston
  • Minimum flow....................................2 x 11 gpm (2 x 41 L/min.)
  • Maximum flow ..................................2 x 26 gpm (2 x 100 L/min.)
  • Pilot pump........................................one gear
  • Maximum rated flow ........................8.7 gpm (32.9 L/min.)
  • Pressure setting .............................540 psi (3723 kPa)
  • System operating pressure
  • Implement circuits..........................4,980 psi (34 336 kPa)
  • Travel circuits...............................4,980 psi (34 336 kPa)
  • Swing circuits.................................4,550 psi (31 371 kPa)
  • Oil filtration.....................one 10-micron full-flow return filter with by-pass one pilot oil filter
  • CYLINDERS
  • Boom (2)
  • Bore ...........................................................................3.74 in. (95 mm)
  • Rod diameter.............................................................2.76 in. (70 mm)
  • Stroke ........................................................................37.0 in. (942 mm)
  • Arm (1)
  • Bore ...........................................................................4.13 in. (105 mm)
  • Rod diameter.............................................................2.95 in. (75 mm)
  • Stroke ........................................................................40.9 in. (1040 mm)
  • Bucket (1)
  • Bore ...........................................................................3.74 in. (95 mm)
  • Rod diameter.............................................................2.56 in. (65 mm)
  • Stroke ........................................................................34.4 in. (875 mm)
  • SWING MECHANISM
  • Swing speed ....................................................................0-13.5 rpm
  • Swing torque...............................................19,955 lb.-ft. (27 058 Nm)
  • UNDERCARRIAGE
  • Carrier rollers (per side) ..................................................1
  • Track rollers (per side) ....................................................6
  • Shoes (per side) ...............................................................41
  • Track guides....................................................................front
  • Track adjustment............................................................hydraulic
  • Travel speed
  • Low ............................................................0-2.1 mph (0-3.5 km/h)
  • High ..........................................................0-3.4 mph (0-5.5 km/h)
  • Drawbar pull...............................................19,400 lb. (8800 kg)
  • GROUND PRESSURE DATA
  • Average ground pressure (with blade)
  • 24-in. (600 mm) triple semi-grouser shoes...............4.97 psi (34.3 kPa); recommended for rocky terrain, hard ground, and stumps
  • 28-in. (700 mm) triple semi-grouser shoes...............4.32 psi (29.8 kPa); recommended for general conditions and soft terrain
  • S P E C I F I C A T I O N S / D I M E N S I O N S
  • 12
  • CAPACITIES 110
  • Fuel tank .........................................................................66 gal. (250 L)
  • Cooling system ...............................................................23 qt. (22 L)
  • Engine lubrication, including filter................................13.8 qt. (13 L)
  • Hydraulic tank................................................................20 gal. (76 L)
  • Hydraulic system ............................................................35 gal. (134 L)
  • Swing gearbox.................................................................2.6 qt. (2.8 L)
  • Propel gearbox (each) .....................................................3.4 qt. (3.2 L)
  • Pump drive gearbox........................................................0.8 qt. (0.8 L)
  • OPERATING WEIGHTS
  • With full fuel tank; 175-lb. (79 kg) operator; 0.79-
  • cu. yd. (0.60 m3), 42-in. (1067 mm), 925-lb.
  • (420 kg) bucket; 9 ft. 3 in. (2.8 m) arm; 3,748-lb.
  • (1700 kg) counterweight; 10 ft. 11 in. (3.34 m)
  • undercarriage length with 6 ft. 6 in. (1.99 m)
  • wide gauge; and backfill blade
  • 24-in. (600 mm) triple semi-grouser shoes...............26,725 lb. (12 122 kg)
  • 28-in. (700 mm) triple semi-grouser shoes...............27,100 lb. (12 292 kg)
  • COMPONENT WEIGHTS
  • Upperstructure (less front attachments and 3,748-lb.
  • [1700 kg] counterweight with full fuel tank) ...........7,039 lb. (3193 kg)
  • Undercarriage equipped with
  • 24-in. (600 mm) triple semi-grouser shoes...............8,889 lb. (4032 kg)
  • 28-in. (700 mm) triple semi-grouser shoes...............9,264 lb. (4202 kg)
  • One-piece boom (with arm cylinder).............................1,812 lb. (822 kg)
  • Arm with bucket cylinder and linkage
  • 7 ft. 4 in. (2.26 m).....................................................1,129 lb. (512 kg)
  • 9 ft. 3 in. (2.80 m).....................................................1,301 lb. (590 kg)
  • Boom lift cylinders (2) total weight ...............................432 lb. (196 kg)
  • Counterweight.......................................................3,748 lb. (1700 kg)
  • Blade ......................................................................2,262 lb. (1026 kg)
  • DIGGING INFORMATION
  • Arm Length Arm Length
  • 7 ft. 4 in. (2.26 m) 9 ft. 3 in. (2.80 m)
  • Arm force with 0.79-cu. yd. (0.60 m3) 42-in.
  • (1067 mm) general-purpose bucket..........................12,348 lb. (5600 kg) 10,805 lb. (4900 kg)
  • Bucket digging force with 0.79-cu. yd. (0.60 m3)
  • 42-in. (1067 mm) general-purpose bucket ...............19,640 lb. (8909 kg) 19,640 lb. (8909 kg)
  • Lifting capacity over front @ ground level 20-ft.
  • (6.1 m) reach...............................4,353 lb. (1974 kg) 4,303 lb. (1952 kg)
  • A Maximum reach .......................24 ft. 10 in. (7.58 m) 26 ft.5 in. (8.06 m)
  • A' Maximum reach @ ground level .24 ft. 6 in. (7.46 m) 25 ft. 10 in. (7.88 m)
  • B Maximum digging depth ..............16 ft. 3 in. (4.96 m) 18 ft. 1 in. (5.51 m)
  • B' Maximum digging depth @ 8-ft. (2.44 m) flat bottom..........................................15 ft. 9 in. (4.80 m) 17 ft. 8 in. (5.38 m)
  • C Maximum cutting height...............26 ft. 2 in. (7.99 m) 27 ft. 0 in. (8.23 m)
  • D Maximum dumping height ...........19 ft. 1 in. (5.82 m) 20 ft. 0 in. (6.09 m)
  • E Minimum swing radius ................7 ft. 8 in. (2.33 m) 8 ft. 6 in. (2.59 m)
  • F Maximum vertical wall ...............14 ft. 9 in. (4.50 m) 16 ft. 5 in. (5.00 m)
  • G Tail swing radius .......................7 ft. 0 in. (2.13 m) 7 ft. 0 in. (2.13 m)
  • CENTERLINE OF SWING
  • A'
  • A
  • B B'
  • C D
  • E
  • F
  • G
  • GROUND LINE
  • D I M E N S I O N S / S P E C I F I C A T I O N S
  • 13
  • DIMENSIONS 110
  • A With 7 ft. 4 in. (2.26 m) arm ..................................23 ft. 7 in. (7.19 m)
  • With 9 ft. 3 in. (2.80 m) arm ..................................23 ft. 8 in. (7.21 m)
  • B With 7 ft. 4 in. (2.26 m) arm ..................................8 ft. 11 in. (2.72 m)
  • With 9 ft. 3 in. (2.80 m) arm ..................................8 ft. 11 in. (2.72 m)*
  • C With 24-in. (600 mm) semi-grouser shoes .............8 ft. 6 in. (2.59 m)
  • With 28-in. (700 mm) semi-grouser shoes .............8 ft. 10 in. (2.69 m)
  • D Blade length ............................................................8 ft. 2 in. (2478 mm)
  • E Blade height ............................................................2 ft. 0 in. (605 mm)
  • F Blade lift height.......................................................1 ft. 7 in. (489 mm)
  • G Blade cut below grade .............................................1 ft. 8 in. (501 mm)
  • H Blade lift angle.........................................................26 degrees
  • I Blade width .............................................................8 ft. 2 in. (2490 mm)
  • *Arm pinned in shipping position.
  • B
  • 2 ft. 11 in. (890 mm)
  • 10 ft. 11 in. (3.34 m)
  • A
  • 8 ft. 7 in. (2.62 m)
  • 6 ft. 11 in. (2.10 m)
  • D
  • 8 ft. 11 in. (2.72 m)
  • 28 in. (700 mm)
  • 24 in. (600 mm)
  • C
  • 8 ft. 1 in. (2.46 m)
  • 6 ft. 6 in. (1.99 m)
  • 1 ft. 5 in. (440 mm)
  • I
  • E
  • G
  • F H
  • S P E C I F I C A T I O N S
  • 14
  • LIFT CAPACITIES
  • Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook, machine
  • equipped with 0.79-cu. yd. (0.60 m3), 42-in. (1067 mm) wide, 925-lb. (420 kg) bucket; and situated on firm, uniform supporting surface. Total load includes
  • weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. Lift capacities are based
  • on SAE standard J1097.
  • Load Point 5 ft. (1.52 m) 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m)
  • Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
  • With 7 ft. 4 in. (2.26 m) arm and 28 in. (700 mm) shoes, blade off ground
  • 15 ft. (4.57 m) 5,099 (2313) 5,099 (2313)
  • 10 ft. (3.05 m) 6,890 (3125) 6,890 (3125) 6,111 (2772) 6,111 (2772) 4,676 (2121) 3,868 (1754)
  • 5 ft. (1.52 m) 7,269 (3297) 5,933 (2691) 4,513 (2047) 3,713 (1684)
  • Ground Line 11,563 (5245) 10,434 (4733) 6,885 (3123) 5,576 (2529) 4,353 (1974) 3,560 (1615)
  • -5 ft. (-1.52 m) 7,321 (3321) 7,321 (3321) 13,472 (6111) 10,363 (4701) 6,727 (3051) 5,428 (2462) 4,288 (1945) 3,498 (1587)
  • -10 ft. (-3.05 m) 12,197 (5532) 10,542 (4782) 6,797 (3083) 5,493 (2492)
  • With 9 ft. 3 in. (2.80 m) arm and 28 in. (700 mm) shoes, blade off ground
  • 15 ft. (4.57 m) 3,446 (1563) 3,446 (1563)
  • 10 ft. (3.05 m) 5,147 (2335) 5,147 (2335) 4,704 (2134) 3,889 (1764)
  • 5 ft. (1.52 m) 10,760 (4881) 10,760 (4881) 7,011 (3180) 5,999 (2721) 4,505 (2043) 3,699 (1678)
  • Ground Line 13,631 (6183) 10,487 (4757) 6,882 (3122) 5,564 (2524) 4,303 (1952) 3,506 (1590)
  • -5 ft. (-1.52 m) 7,039 (3193) 7,039 (3193) 13,314 (6039) 10,208 (4630) 6,636 (3010) 5,335 (2420) 4,183 (1897) 3,392 (1539)
  • -10 ft. (-3.05 m) 14,344 (6506) 14,344 (6506) 13,322 (6043) 10,291 (4668) 6,623 (3004) 5,322 (2414)
  • -15 ft. (-4.57 m) 9,086 (4121) 9,086 (4121)
  • BUCKETS
  • A full line of buckets is offered to meet a wide variety of applications. Buckets have an adjustable bushing for side clearance, with the exception of the ditching
  • bucket. Tooth selection includes either the John Deere Fanggs tooth or the ESCO Vertalok tooth. Replaceable cutting edges are available through John
  • Deere parts. Optional side cutters add 6 inches (150 mm) to bucket widths.
  • Bucket Bucket Bucket Arm Dig Force Arm Dig Force Bucket
  • Type Bucket Width Capacity* Weight Dig Force 7 ft. 4 in. (2.26 m) 9 ft. 3 in. (2.80 m) Tip Radius No. Teeth
  • in. mm cu. yd. m3 lb. kg lb. kN lb. kN lb. kN in. mm
  • *All capacities are SAE heaped ratings.
  • S P E C I F I C A T I O N S
  • 15
  • BUCKET SELECTION CHART
  • General-Purpose Bucket* Heavy-Duty Bucket*
  • Material (loose weight)
  • Wood chips - 700 lb./cu. yd. (420 kg/m3) ......................................................3.25 cu. yd. (2.5 m3)
  • Peat, dry - 750 lb./cu. yd. (440 kg/m3) ...........................................................2.75 cu. yd. (2.1 m3)
  • Cinders - 950 lb./cu. yd. (560 kg/m3).............................................................2.00 cu. yd. (1.5 m3)
  • Peat, wet - 1,170 lb./cu. yd. (690 kg/m3)........................................................1.75 cu. yd. (1.3 m3)
  • Topsoil - 1,600 lb./cu. yd. (950 kg/m3) ..........................................................1.38 cu. yd. (1.1 m3)
  • Coal - 1,780 lb./cu. yd. (1050 kg/m3) .............................................................1.25 cu. yd. (1.0 m3)
  • Caliche - 2,100 lb./cu. yd. (1250 kg/m3) ........................................................0.88 to 0.63 cu. yd. (0.7 to 0.5 m3) 0.75 to 0.5 cu. yd. (0.6 to 0.4 m3)
  • Earth, loam - 2,100 lb./cu. yd. (1250 kg/m3)..................................................0.88 cu. yd. (0.7 m3) 0.75 cu. yd. (0.6 m3)
  • Shale - 2,250 lb./cu. yd. (1330 kg/m3)............................................................0.88 cu. yd. (0.7 m3) 0.75 cu. yd. (0.6 m3)
  • Sand, dry - 2,400 lb./cu. yd. (1420 kg/m3) .....................................................0.88 cu. yd. (0.7 m3) 0.75 cu. yd. (0.6 m3)
  • Clay, dry - 2,500 lb./cu. yd. (1480 kg/m3)......................................................0.88 to 0.63 cu. yd. (0.7 to 0.5 m3) 0.75 cu. yd. (0.6 m3)
  • Earth, dry - 2,550 lb./cu. yd. (1510 kg/m3) ....................................................0.75 to 0.63 cu. yd. (0.6 to 0.5 m3) 0.63 cu. yd. (0.5 m3)
  • Limestone, broken or crushed - 2,600 lb./cu. yd. (1540 kg/m3) ....................0.75 to 0.5 cu. yd. (0.6 to 0.4 m3) 0.63 to 0.5 cu. yd. (0.5 to 0.4 m3)
  • Earth, wet - 2,700 lb./cu. yd. (1600 kg/m3) ....................................................0.75 cu. yd. (0.6 m3) 0.63 cu. yd. (0.5 m3)
  • Clay, wet - 2,800 lb./cu. yd. (1660 kg/m3) .....................................................0.75 cu. yd. (0.6 m3) 0.63 cu. yd. (0.5 m3)
  • Rock, granite, blasted and broken - 2,800 lb./cu. yd. (1660 kg/m3) ..............0.88 to 0.63 cu. yd. (0.7 to 0.5 m3) 0.75 to 0.5 cu. yd. (0.6 to 0.4 m3)
  • Sand, moist - 2,850 lb./cu. yd. (1690 kg/m3) .................................................0.75 cu. yd. (0.6 m3) 0.63 cu. yd. (0.5 m3)
  • Sand and gravel, dry - 2,900 lb./cu. yd. (1720 kg/m3) ...................................0.75 cu. yd. (0.6 m3) 0.63 cu. yd. (0.5 m3)
  • Sand, wet - 3,100 lb./cu. yd. (1840 kg/m3).....................................................0.63 cu. yd. (0.5 m3) 0.50 cu. yd. (0.4 m3)
  • Sand and gravel, wet - 3,400 lb./cu. yd. (2020 kg/m3)...................................0.63 cu. yd. (0.5 m3) 0.50 cu. yd. (0.4 m3)
  • *Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Larger
  • buckets may be possible when using light buckets, for flat and level operations, less compacted materials, and volume loading applications such as mass
  • excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications and uneven surfaces.
  • Bucket capacity indicated is SAE heaped.
  • DKAX110 Litho in U.S.A. (99-06)
  • ENGINE
  • Auto-idle system
  • Automatic belt tension device
  • Batteries (two 12 volt), 180-min. reserve capacity
  • (1,250 CCA)
  • Dual element dry-type air filter
  • Electric fuel shutoff
  • Enclosed fan guard
  • Conforms to SAE J1308
  • Engine coolant to -34°F (-37°C)
  • Fuel filter with water separator
  • Full-flow oil filter
  • Radiator trash screen
  • Underhood muffler with vertical curved end
  • exhaust stack
  • Electric ether starting aid
  • Engine coolant heater
  • HYDRAULIC SYSTEM
  • Drift-reduction valve for boom down, arm in
  • Spring-applied, hydraulically-released auto-
  • matic swing brake
  • Auxiliary hydraulic and electric pilot controls
  • Auxiliary hydraulic lines
  • Hydraulic filter restriction indicator kit
  • Load-lowering control device
  • UNDERCARRIAGE
  • Backfill blade
  • Planetary drive
  • Propel motor shields
  • Track guides, front idler
  • Triple semi-grouser shoes, 24 in. (600 mm)
  • Triple semi-grouser shoes, 28 in. (700 mm)
  • Two-speed propel with automatic shift
  • Upper carrier roller (1)
  • UPPERSTRUCTURE
  • Counterweight, 3,748 lb. (1700 kg)
  • Right- and left-hand mirrors
  • Toolbox
  • Vandal locks with ignition key
  • 110
  • Interior light
  • Mode selectors (illuminated)
  • Power modes - three
  • Travel modes - two with automatic shift
  • Work modes - four
  • Monitor system with alarm features
  • Auto-idle indicator light
  • Engine air cleaner restriction indicator light
  • Engine coolant temperature indicator light
  • with audible alarm
  • Engine oil pressure indicator light with
  • audible alarm
  • Fluid level
  • Engine coolant level indicator light
  • Engine oil level indicator light
  • Hydraulic oil level indicator light
  • Low alternator charge indicator light
  • Low fuel indicator light
  • Motion alarm with cancel switch
  • Conforms to SAE J994
  • Propel pedals and levers
  • Seat belt, 2 in. (51 mm), retractable
  • Seat belt, 3 in. (76 mm), retractable
  • Tinted glass
  • Air conditioning
  • Alternate pilot control pattern
  • AM/FM radio
  • Cab window vandal protection
  • Circulation fan
  • Protection screens for cab front, rear, and side
  • 24- to 12-volt D.C. convertors
  • ELECTRICAL
  • Blade-type multi-fused circuits
  • By-pass start safety cover on starter
  • Positive terminal battery covers
  • LIGHTS
  • Halogen work lights
  • One mounted on boom
  • One mounted on frame
  • Cab door
  • Engine hood
  • Fuel cap
  • Service doors
  • Toolbox
  • FRONT ATTACHMENTS
  • Bucket-to-arm clearance adjustable bushing
  • (except ditching buckets)
  • Centralized lubrication system
  • Dirt seals on all bucket pins
  • No-boom-arm
  • Arm, 7 ft. 4 in. (2.26 m)
  • Arm, 9 ft. 3 in. (2.80 m)
  • Boom cylinder with plumbing to mainframe
  • Buckets
  • Ditching
  • General purpose
  • General-purpose high capacity
  • Heavy duty
  • Heavy-duty high capacity
  • Severe-duty cast lip
  • Severe-duty plate lip
  • Side cutters and teeth
  • Heavy-duty grapple
  • Hydraulic bucket material clamps
  • Slide-Loc hydraulic quick coupler
  • OPERATOR'S STATION
  • Adjustable seat with independent control
  • positions (levers-to-seat, seat-to-pedals)
  • Deluxe suspension cloth seat with adjustable
  • armrests
  • Front windshield wiper with intermittent speed
  • Gauges (illuminated)
  • Engine coolant
  • Fuel
  • Heater, 20,000 Btu/hr. (5.9 kW) with blower fan
  • Horn, electric on left control lever
  • Hourmeter, electric
  • Hydraulic shutoff lever, all controls
  • A D D I T I O N A L E Q U I P M E N T
  • KEY: Standard equipment Optional or special equipment
  • 16
  • Net engine power is with standard equipment including air cleaner, exhaust
  • system, alternator, and cooling fan, at standard conditions per SAE J1349 and
  • DIN 6270B, using No. 2-D fuel at 35 API gravity. No derating is required up to
  • 10,000 ft. (3050 m) altitude. Gross power is without cooling fan.
  • Specifications and design subject to change without notice. Wherever applicable, specifications are
  • in accordance with SAE standards. Except where otherwise noted, these specifications are based on
  • a unit with 42-in. (1067 mm) bucket, 24-in. (600 mm) track shoes, 3,748-lb. (1700 kg) counterweight,
  • full fuel tank, and 175-lb. (79 kg) operator.
  • 110 110
  • CONTROL OWNING AND OPERATING COSTS
  • Total Repair Cost Management (TRCM) is part of John Deere's proactive, fixbefore-
  • fail strategy on machine maintenance that will help control costs, increase
  • profits, and reduce stress. Included in this comprehensive lineup of
  • ongoing programs and services are:
  • OilScan Plus program - tells you what's going on inside all of your
  • machine's major components so you'll know if there's a problem before you see
  • a decline in performance. OilScan Plus oil analysis is included in most SECURE -
  • Extended warranty and preventive-maintenance contracts.
  • MaintainIt program - Flexible, easy-to-use MaintainIt software lets
  • you start your own computerized maintenance program by putting complete
  • machine histories at your fingertips. It features a library of John Deere equipment,
  • a spare-parts inventory list, and a list of maintenance tasks. Compare
  • costs; schedule maintenance procedures by hourmeter or date; or print, fax, or
  • e-mail purchase and work orders with just a few quick keystrokes.
  • Component life-cycle data - gives you vital information on the projected
  • life span of components and lets you make informed decisions on machine
  • maintenance by telling you approximately how many hours of use you can
  • expect from an engine, transmission, or hydraulic pump. This information can
  • be used to preempt catastrophic downtime by servicing major components at
  • about 80 percent of their life cycle.
  • Preventive Maintenance (PM) contracts - give you a fixed cost for
  • maintaining a machine for a given period of time. It also helps you avoid
  • downtime by ensuring that critical maintenance work gets done right and on
  • schedule. On-site preventive maintenance service performed where and when
  • you need it helps protect you from the expense of catastrophic failures and lets
  • you avoid waste-disposal hassles.
  • SECURE-Extended warranty - gives you a fixed cost for machine repairs
  • for a given period of time so you can effectively manage costs. Whether you
  • work in a severe-service setting or just want to spread the risk of doing business,
  • this is a great way to custom-fit coverage for your operation. And a SECUREExtended
  • contract also travels well because it's backed by John Deere and is
  • honored by all Deere construction dealers.
  • Customer Support Advisors (CSAs) - Deere believes the CSA program
  • lends a personal quality to Total Repair Cost Management. Certified CSAs have
  • the knowledge and skills for helping make important decisions on machine
  • maintenance and repair. Their mission is to help you implement a plan that's
  • right for your business and take the burden of machine maintenance off your
  • shoulders.
Add of the above items to my quote request




* Please call us with any questions about our excavator jd 110 rentals in Flemington NJ, Somerville, Flagtown, Frenchtown and Western New Jersey.