Your Quote Request  |  Checkout   

CONSTRUCTION EQUIPMENT::
Dozer, CAT D8 (ripper available) 4 Way

Where to find Dozer, CAT D8  ripper available  4 Way in Flemington

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: CATERPILLER
Model: D8-T
Comments:
  • SPECIFICATIONS
  • Units: US | Metric
  • ENGINE: Engine Model Cat C15 ACERT
  • Flywheel Power 310
  • Gross Power 347 hp
  • Net Power - Caterpillar 310 hp
  • Net Power - ISO 9249 310 hp
  • Net Power - SAE J1349 307 hp
  • Net Power - EU 80/1269 310 hp
  • Net Power - DIN 70020 322 PS
  • Bore 5.4 in
  • Stroke 6.75 in
  • Displacement 928 in3
  • WEIGHTS:
  • Operating Weight 84850 lb
  • Shipping Weight 65152 lb
  • Undercarriage Shoe Type Moderate Service
  • Width of Shoe 22 in
  • Shoes/Side 44
  • Grouser Height 3 in
  • Pitch 8.5 in
  • Ground Clearance 24.3 in
  • Track Gauge 82 in
  • Length of Track on Ground 10.5 ft
  • Ground Contact Area 5554 in x2
  • TRANSMISSION:
  • 1 Forward 2.1 mph
  • 2 Forward 3.8 mph
  • 3 Forward 6.6 mph
  • 1 Reverse 2.8 mph
  • 2 Reverse 5 mph
  • 3 Reverse 8.8 mph
  • SERVICE REFILL CAPACITIES:
  • Fuel Tank 170 gal
  • Cooling System 20.3 gal
  • Engine Crankcase* 10 gal
  • Power Train 41 gal
  • Final Drives (each) 3.3 gal
  • Roller Frames (each) 17.2 gal
  • Pivot Shaft Compartment 10.6 gal
  • Variable Fan Hub .82 gal
  • Hydraulic Controls
  • Pump Type Piston-type, Variable displacement
  • Pump Output (Steering) 73 gal/min
  • Pump Output (Implement) 60 gal/min
  • Tilt Cylinder Rod End Flow 34 gal/min
  • Tilt Cylinder Head End Flow 45 gal/min
  • Bulldozer Relief Valve Setting 3500 psi
  • Tilt Cylinder Relief Valve Setting 3500 psi
  • Ripper (Lift) Relief Valve Setting 3500 psi
  • Ripper (Pitch) Relief Valve Setting 3500 psi
  • Steering 5700 psi
  • Winches
  • Winch Model PA140VS
  • Weight* 3947 lb
  • Oil Capacity 4 gal
  • Increased Tractor Length 22.2 in
  • Winch Case Width 45.6 in
  • Drum Width 12.6 in
  • Flange Diameter 18 in
  • Rippers
  • Maximum Penetration Force (shank vertical) 27920 lb
  • Pry out Force 50070 lb
  • Total Operating Weight* (with SU-Blade and Ripper) 86597 lb
  • Pry out Force (Multi-Shank Ripper with one tooth) 51230 lb
  • Additional Shank 732 lb
  • BLADES:
  • Type 8A
  • Capacity (SAE J1265) 6.1 yd3
  • Width (over end bits) 13' ft
  • Height 3.85 ft
  • Digging Depth 24.7 in
  • DIMENSIONS:
  • Ground Clearance 24.3 in
  • Track Gauge 82 in
  • Width without Trunnions (Standard Shoe) 8.7 ft
  • Height (FOPS Cab) 11.34 ft
  • Height (Top of Stack) 11.3 ft
  • Drawbar Height (Center of Clevis) 27.87 in
  • Length of Track on Ground 126.26 in
  • Overall Length Basic Tractor 15.2 ft
  • Length Basic Tractor with Winch 17.3 ft
  • Length with Single-Shank Ripper 21 ft
  • Length with Multi-Shank Ripper 20.8 ft
  • Overall Length (SU-Blade/SS Ripper) 25.8 ft
Add of the above items to my quote request




* Please call us with any questions about our dozer cat d8 ripper available 4 way rentals in Flemington NJ, Somerville, Flagtown, Frenchtown and Western New Jersey.